Description

3/4″ x 3/4″ Rod End Kit

Rod End Kit Includes:

(1) 3/4-16 x 3/4 RH Heat Treated Chrome Moly Rod End
(1) 3/4-16 x 3/4 LH Heat Treated Chrome Moly Rod End
(1) 3/4-16 RH Jam Nut
(1) 3/4-16 LH Jam Nut
(1) Choice of 3/4-16 RH Weldable Thread Bung – 1.00″ I.D. ,1.00″ I.D. w/Wrench Flats , 1.25″ I.D. , or 1.50″ I.D.
(1) Choice of 3/4-16 LH Weldable Thread Bung – 1.00″ I.D. , 1.00″ I.D. w/Wrench Flats , 1.25″ I.D. , or 1.50″ I.D.
(4) Choice of 3/4″x5/8″ High Misalignment Spacers (2″ mounting width) – or –3/4″ I.D. x 1.63″ O.D. Misalignment Washers (1.48″ mounting width)

-Static Load:  27,019 lbs

-Ball Thickness:  .875″

Assembly Tips:

• Start your weld on the tube. (Too much heat to the bung will warp threads.)
• To avoid the seizing of threads, DO NOT weld with the rod end installed!
• Wait until everything is cooled enough to touch before installing rod ends.
• Thread rod ends all the way down to ensure threads are not warped, then adjust to needed length.